This explosion-proof bell is available in two voltages.
The bell is manufactured from cast iron, finished in epoxy paint.
Colour to customer's specification.
Zone 1 and Zone 2 use. Exd IIB T5.
ATEX approved Ex II 2G.
BASEEFA certified.
IECEx certified, Gb.
Brazilian (Inmetro) certified.
IP65.
Certified temperature: –20ºC to +55ºC.
2 cable entries.
Captive cover screws.
Material: |
Cast Iron |
Finish: |
Grey epoxy paint as standard or to customer specification |
Voltage: |
24V d.c. or 200/254V a.c. 50/60 Hz. |
Contact Spring: |
Phosphor Bronze |
Contacts: |
Silver. |
Coil: |
Bakelite former. |
Magnet: |
Laminated iron. |
Armature: |
Pivoted to operate shaft and hammer at back of gong through flameproof bearing. |
Certified Temp: |
-20ºC to +55ºC |
Weight: |
11 kg. |